| Post 1 made on Wednesday February 26, 2003 at 02:13 |
Haave Lurking Member |
Joined:
Posts: | February 2003
1 |
|
|
I am trying to program a Niles IntelliControl remote with the the discrete codes for the Plus U3-1100Z Projector. The discrete codes I want to change are the Video inputs.
When the IntelliControl powers, the Rotel RSX-972 receiver will shutdown in the last mode it was using. AS an example, if satellite was the last use of the system before shutting down, (composite feed to the projector) it will come back on with a satellite signal output from the receiver.
The Plus projector has auto sensing to switch between the different inputs, RGB, Composite, S-Video. However, The projector will not sense the DVD Component signal if the unit was not shut down in the DVD mode. If I shut the receiver off in Satellite mode and turn it on in DVD mode, the projector is nopt able to sense the DVD signal and it fails out of sync.
Therefore, if we could get the discrete IR codes, life would be simplier.
Can anyone help?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
