| Post 1 made on Tuesday February 11, 2003 at 09:58 |
You stated in another post regarding discretes for a Mitsubishi WD-65000 that if you hit Ch+ or Ch- that it switches the input to ANT, then you must cycle through inputs using the Input+ and Input-.
I tried this out with the 65000 but it didn't seem to work. Anytime I hit Ch+ or Ch- it would only display my current input, not switch me to ANT. My question: must there be something connected to the ANT input on the back of the TV? Or should Ch+ or Ch- always switch to ANT regardless of having something connected to the input.
Thanks.
Brad
|
|
| Post 2 made on Tuesday February 11, 2003 at 15:50 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,233 |
|
|
I would assume if you do not have an tenna hooked up, this is the problem. I've only done one of these sets and its in Florida(I'm in Chicago so getting to it to verify is difucult)
The system does indeed have an Antenna and Modulated stations on the Antenna A input.
At least make sure the Antenna A input is turned ON inthe menu system. At the very least, it should kick over to Ch 3
Impaqt
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
