Post 1 made on Sunday February 2, 2003 at 23:16 |
restes Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
in one of my demo rooms i will have 2 7.1 systems setup. can the pronto pro control 2 pioneer elite 45's on different rf modules (1 for each recever) set to different channels. for instance when i want to demo the inwall setup to top receiver is used, when i want to demo the towers the bottom receiver is used. can this be done with 1 remote?
|
|
Post 2 made on Monday February 3, 2003 at 00:27 |
joe sexton Founding Member |
Joined: Posts: | March 2002 206 |
|
|
I beleive so, You have to set the RF channel differently for each rf unit and program the channels to the corresponding rf unit in the pro. you will have 2 different devices programmed in(the 2 elite 45tx units), each operating on different rf freq's for each different receiver.
Joe
|
Hey, thats a nice plasma, you can put that in the back of my truck... |
|
Post 3 made on Tuesday February 4, 2003 at 19:05 |
Mikeyb Founding Member |
Joined: Posts: | August 2001 230 |
|
|
....and just make sure the RX-77 RF-IR unit and/or it's IR extenders (eyes) are not in view of the other Pioneer. Those things are trasmitting IR, so if it is in view of both Pioneers, then chances are that both pioneers would respond.
|
|
OP | Post 4 made on Tuesday February 4, 2003 at 19:44 |
restes Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.