| Post 1 made on Monday January 27, 2003 at 10:28 |
Does anyone know if discretes for a 73711 (Diamond Series) will work for a WD-65100 (DLP Series)?
Thanks.
Brad
|
|
| Post 2 made on Tuesday January 28, 2003 at 09:04 |
vts1134 Founding Member |
Joined:
Posts: | February 2002
305 |
|
|
the codes dont' work. I haven't found any codes for the DLP as of yet. I know that you can take the Mitsu remotes and do some kind of button sequence that makes them give discrete codes right from the factory remote but I can't remember how to do it. This might hold true for the DLP as well.
|
|
| Post 3 made on Wednesday January 29, 2003 at 01:17 |
carter73 Lurking Member |
Joined:
Posts: | January 2003
9 |
|
|
The code is 090 while holding the power button (make sure the slide is on TV) I tried this with the DLP and it didn't work, I found the code on another post good luck. Also when finished push and hold tv and type in 000.
|
|
| Post 4 made on Wednesday January 29, 2003 at 11:45 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,230 |
|
|
The WD65000 did not have any discrete codes. The 65100 works with the 090 Codeset.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
