Your Universal Remote Control Center
RemoteCentral.com
PlayStation 3 Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Harmony PS3 Adapter + Pronto - Not all codes working
This thread has 4 replies. Displaying all posts.
Post 1 made on Friday May 22, 2009 at 01:42
Azathoth
Lurking Member
Joined:
Posts:
May 2009
5
I have a TSU3000. I just got the Harmony 3 Adapter and downloaded the .ccf that Daniel Tonks made. Imported the ccf into PENG (v3.1.3, which is the latest, as far as I can tell), and set up all my links. My problem is that around 1/3 of the codes don't seem to work for me. For example, left, up, and down all work, but right does not. Similarly, pause, ffw, rew all work, but play does not. I tried cutting and pasting the IR codes from the Excel spreadsheet included with the .ccf for the buttons that don't function, but that didn't solve the issue. Firmware is up to date on both the TSU3000 and the PS3.

Suggestions?
Post 2 made on Friday May 22, 2009 at 02:41
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
Interesting. The codes work perfectly on an original Pronto (TSU2000) but when I import the CCF to a TSU7000 I see the same thing as you. The ones that do work don't work as well as on the TSU2000.

I tried importing them to a URC MX-800, and they also didn't work that well.

However I do seem to be making some progress. Try these for directions:

Edit - codes removed since new ones have been posted in the file.

Last edited by Daniel Tonks on May 22, 2009 06:02.
OP | Post 3 made on Friday May 22, 2009 at 05:31
Azathoth
Lurking Member
Joined:
Posts:
May 2009
5
Very interesting. Just tried the new direction codes on my TSU3000. Up, left, and right work as expected, but the new code for down seems to map to either enter or the x button - not sure exactly which, since they both have the same effect in the menus. Unfortunately, I don't have any other remotes to test on.

Here are my testing results:

Up -> Original code worked, new code works also
Down -> Original code worked, new code seems to map to enter or x
Left -> Original code worked, new code works also
Right -> Original code did NOT work, new code does work

I'll try to sit down tomorrow and map out exactly which codes are working and which ones aren't.

Thanks for the help!
Post 4 made on Friday May 22, 2009 at 06:00
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
Whoops - I just checked and that DOWN code *does* map to ENTER. But I've already moved on from those codes.

I've re-captured every one using a different Harmony source and a different Pronto to learn, and they seem to work fine now on my TSU7000 as well as a URC MX-800. The CCF and XLS in the file area have been fully updated.

Let me know if you spot any issues; these were a real pain to get just right.
OP | Post 5 made on Sunday May 24, 2009 at 01:49
Azathoth
Lurking Member
Joined:
Posts:
May 2009
5
Just tested them, and the new codes are all working perfectly on a TSU3000.
Thanks for the work capturing them!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse