| Post 1 made on Thursday January 17, 2008 at 08:00 |
Dummy Lurking Member |
Joined:
Posts: | January 2008
5 |
|
|
Maybe this isn't a problem but I thought it was a bit strange. For reference, I have a Pioneer PDP-5080HD
Any TV channel macro I create with the number 8 needs to have a delay of at least 0.5 - 1 sec between the numbers.
Any other number combination will accept a delay of 0.1 secs.
I use the learned IR codes from My Database for the TV Channel numbers. All of the IR codes are in the "regular" hex form as opposed to the "Raw" form.
I tried linking the IR codes to the TV Digits page as opposed to getting them from My Database but this didn't allow me to reduce the delay time.
I read about similar problems on the 9600 but I haven't seen this issue with the 9400.
Is this problem with my TV or is this the 9400?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
