Your TSU7000 PCF can be imported into PEP, the editor for the TSU9600 and then downloaded to the remote. As imported your configuration file will only take up the 240x320 area in the upper left corner of the screen however. It will be fully functional, but you'll want to at that point work on updating your graphics throughout to take advantage of the TSU9600's 640x480 screen. In the process you'll also want to enhance the functionality of your configuration file programming functions for the TSU9600's Power and Firm 5 hard buttons. These are new buttons over what the TSU7000 offers. Also, the TSU9600's Page Up and Page Down hard buttons are programmable. This is not the case with the TSU7000, so you may want to take advantage of that. Guess I should also point out that the TSU9600 does not support the "Device Overview Template" and "Page Overview Template" pages as seen under the System device in the PPENG, the editor for the TSU7000. The NavMode and SmartSurf functions are also not supported, so if you were using these features to change between devices/activities you'll have to create your own Activities type page setup yourself.
For an overview of what the TSU9600 offers over the Pronto NG lines of remotes (TSU7000) click
here.
Last edited by Lowpro
on January 11, 2008 10:04.
