Hello, I would need the Panasonic SA-XR700 IR codes. Before I bite the bullet and teach them one-by-one, I was wondering whether anybody of you out there might have them (CCF or XCF, doesn't matter).

I have to say that I am underwhelmed by the "factory database" of the TSU9600. It may have "thousands" of IR codes, but none of my components are included (and they are not overly exotic). This is going to be a big job for the enthusiast community...

The codes are likely quite similar to my SA-XR57. I only currently have those in an MX-800 file, but if you need some of the discretes I could convert them to hex.

Thank you, Daniel, that's very kind! In the meantime, I have pulled a CCF file for a SA-XR45 from the file area, and it works mostly fine. There is one thing i do not understand though. When pressing the VOLUME + or - buttons, it appears that volume is changed only by 1 dB, and that's it. In order to move more, I need to press the button repeatedly. One long pressure will not do. What is it that I am doing wrong?
thanks
AAG

Please post the IR code data from one of the codes that's not working an we can see what's wrong. In the meantime, there's a 'duration' setting in the IR code window that defaults to 'Minimum'. Try changing this to some value such as 0.2s, etc...

Thank you, Lyndel.

What is strange is the following:

I have a Xantech IR repeater installed, which has a little LED that blinks when a code is sent. Well, when press the VOL hard button, the LED lights up only once - even if I keep the button pressed...

Is there some parameter I need to change in order to instruct the TSU9600 to keep firing a command when keeping a button pressed?

If there is more than one command on the button then it will not repeat.
Or if there is a delay.
Or a jump
Or anything really.

thank you friends! It drives me crazy - but I just can't seem to get it to work. I would need the volume button to fire off repeatedly, but it just fires once, and that's it... I have taken out all links and jumps, and learned the command straight from the Panasonic remote.

Here is the IR code. I tried to introduce a delay, but to no avail. Do you have any ideas what might be wrong?

0000 0062 0095 0001 0080 0041 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0AC0 0080 0041 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0AC0 0080 0041 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0030 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0010 0011 0030 0011 105D

If you have more than one action on your volume button then it will fire once only. If you add a delay it will fire only once. You can only adjust the duration.

By the way, I'm no expert, but the code you have posted looks unusually long.

There is no way that is a clean code...

Looks like a partial repeat with an error, just glancing at it.

It looks like 3 times the same code in repeated burst,

010000000000010000000101000000001000010010000001

I figured - by trial and error - that if you want to have a learned IR command repeated, you have to make it repeat by the original remote during the learning process! And I was trying to just hit the command on the original remote for the shortest period, in order to make it NOT repeat...

Oh well, I have now resolved the issue. I thought I better post it here, since (1) I wanted to acknowledge my ignorance, and apologize for wasting everybody's time, and (2) it may prevent others from going through this odyssey!