Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Professional Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 2
Topic:
Command Failed
This thread has 22 replies. Displaying posts 16 through 23.
Post 16 made on Tuesday June 23, 2020 at 17:34
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,633
See your other post about the Matrix Switcher.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 17 made on Monday July 13, 2020 at 15:58
Pambs
Long Time Member
Joined:
Posts:
January 2007
54
My router started giving me problems again. So i thought of installing a new one

I have done the setup. Tsu seems gets connecting to the wifi but the wifi signal appears with a ? When i use static ip i get wifi signal but command fail

I run diagnostic and it doesn't get ip address. Modem is D-link DIR-615

Last edited by Pambs on July 14, 2020 02:38.
Post 18 made on Monday July 13, 2020 at 20:40
mpg7321
Regular Member
Joined:
Posts:
June 2020
56
Just a guess, but I just bought a TSU9600 and could not get it to work with a brad new latest and greatest router if I used a password. With the age of the TSU models I believe it just doesn't work well with the latest protocols. I had to use a older Wireless Bridge to use as an in between. Worked great.
OP | Post 19 made on Tuesday July 14, 2020 at 02:38
Pambs
Long Time Member
Joined:
Posts:
January 2007
54
I went back to the old router. It's connecting. Diagnostic though giving me the below error

Extender 1 ip address is unknown

I have gave the extender a fixed ip and on the diagnostics screen i am getting the error that extender did not reply

I have tried a second extender and it works fine without any issues. Any idea what might be the issue with the first one?

Last edited by Pambs on July 14, 2020 06:16.
OP | Post 20 made on Tuesday July 14, 2020 at 14:19
Pambs
Long Time Member
Joined:
Posts:
January 2007
54
Stopped working again...
Post 21 made on Wednesday July 15, 2020 at 18:54
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,633
Did you set a fixed up via the extender config screen?

Also, if you have multiple extenders that the tsu uses, all must be set to fixed ip addresses in pep2. Only marking one of multiple will not work.

Last edited by Lyndel McGee on July 15, 2020 20:44.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 22 made on Friday July 17, 2020 at 03:01
Pambs
Long Time Member
Joined:
Posts:
January 2007
54
Okay it was something stupid i didn't configure the extended for all components :D

I am using PEP 3. Do i still have to use fixed ip or extended id is enough?
Post 23 made on Saturday July 18, 2020 at 16:30
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,633
No need to use fixed IP unless you are having issues. Note that when you do this, extender discovery is bypassed and that is why you must set the IP address for all extenders.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Page 2 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse