Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Professional Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Newbie Question- Vintage Gear
This thread has 2 replies. Displaying all posts.
Post 1 made on Wednesday December 11, 2019 at 14:44
SClute
New Member
Joined:
Posts:
December 2019
2
Have a new office workspace. There is a motorized screen that appears to be controlled by a Sompy IR1 which has disappeared. I have found the codes for this remote for the Pronto system- my question is what's the most cost effective remote I can purchase that I can convert/program with these codes? I'm not opposed from buying used- just figure if I have to buy a replacement remote I'd rather spend $ on a multiuse remote.

Any help or direction would be appreciated.
Post 2 made on Wednesday December 11, 2019 at 21:41
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,373
Depends on what you want. Color? Black And White? Screen Resolution? Scroll wheel?

All Philips remotes are discontinued so take your pick. I personally use the TSU9600 remotes and extenders. I had a 1st Gen Marantz RC5000i, then a Marantz RC9200, Then a Pronto TSU7000, then a TSU9600, TSU9400, and TSU9800.

For what you need, if you have a computer with an RS232 port, I'd recommend something as simple as a Philips TSU2000 (ProntoEdit) or the Marantz RC5000i (Touch Screen Setup). The only challenge you may have is finding batteries.

Note that almost any platform will take the Pronto Hex data as inputs.

If you were to post a Somfy code here that you got, I'm sure one of us will decipher and tell you which Philips remotes can support it natively.

URC also supports Pronto Hex but I don't think they publish their editor to the average consumer.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Wednesday December 18, 2019 at 11:52
SClute
New Member
Joined:
Posts:
December 2019
2
So I have ordered and received a TSU 2000/01.
USB to 3.5mm Serial cable with correct pinout and chipset is on the way.
I have this file-[Link: files.remotecentral.com] which appears to be a csv with the commands.
I also have this file - a ccf [Link: files.remotecentral.com] which has the remoted I'm looking to replicate as part of the larger file.

Is there wiki on how to edit the ccf file so that it is just the Sompy 103?

Thanks so much!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse