Your Universal Remote Control Center
Philips Pronto Professional Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


DirectTV RC 73 Propnto codes
This thread has 2 replies. Displaying all posts.
Post 1 made on Tuesday April 10, 2018 at 11:58
Junior Member
April 2018
Hi All,

I was forced to switch to Direct TV and can't seem to find the pronto codes to input into my Crestron IR file. Any help would be much appreciated.
Post 2 made on Tuesday April 10, 2018 at 19:27
Lyndel McGee
RC Moderator
August 2001
According to this post on the Web, the Direct TV code are the same across all units.


The RC73 is a remote that can be configured for either IR or RF.

Not sure if the info below will work but is worth a try.

You might want to try the HR24 file from here.


You will need either ProntoEdit or TouchScreenSetup to open this file or perhaps you have some other CCF viewer that might let you extract the codes. I found this note on Wikipedia about a tool named CCFExtractor that seems to fit the bill of what you need.


Also, have a look here and you will find 2 sets of discrete power codes. If either of these 2 sets works, you can look for pronto configurations of the same model (for example H23) and likely be able to use those codes.

Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 3 made on Friday June 22, 2018 at 02:48
New Member
May 2018
Any one have MI tv ip control commands

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse