| Post 1 made on Friday January 30, 2015 at 07:34 |
Roadrunner Lurking Member |
Joined:
Posts: | September 2003
5 |
|
|
Hi there!
I´ve tried a lot of tips from this forum but it seems that i got stucked with my problem.
My Pronto TSU9400 is hanging on startup and only shows the screen with the blue PHILIPS logo.
I´ve tried to do a factory reset (Menu + Home + Page+) and pressing the firm keys 2, 3 and 4 together within 2 seconds and holding it for a long time causes no reaction.
The device doesn´t switch to firmware download mode. I tried the same method on another working TSU9400 which switched into the firmware download mode properly.
Also switching the device on with holding the firm keys 2, 3 and 4 pressed only results in the screen with the PHILIPS logo.
Is there any other solution that can help me or is the dead pronto a case für the trashbin?
I hope that someone here has a tip to help me with my problem.
Thanks for your help.
|
|
| Post 2 made on Friday January 30, 2015 at 21:33 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
I have seen a few like this.. if a factory reset does not fix it, looks like its dead.
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| OP | Post 3 made on Sunday February 1, 2015 at 05:10 |
Roadrunner Lurking Member |
Joined:
Posts: | September 2003
5 |
|
|
Thanks for your answer.
Unfortunately that are bad news.
Then I can use the Pronto for spare parts only.
Thanks anyway.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
