Having been a Pronto user for 9 years from the TS-1000 RC-5000 and an RU990, I've got an TSU6000 and an RFX6000 and I've got 2 questions.
1. I run a wireless network that has 3 Access Points to cover a house which is 55m (180ft) from one end to the other. It has to use WPA as a great deal of corporate email traffic passes around the internal netwok. The Pronto will only be used in a media room. I have an old Linksys WAP11 which is 11b only, and would be 6-10 feet away from Pronto. Would it work if I hooked up a Pronto dedicated Access Point to the RFX6000 via a crossover cable, in terms of throughput and compatibility with the Pronto? Has anyone tried the Pronto on an 11b network?
2. I want to use power sense for the one piece of equipment I can't get discrete codes for (Sky HD). Would the SVideo or a composite signal provide enough voltage?
I only loaded the software today and I'm really impressed. It's easy to use if you are used to Pronto programming but far more powerful and MUCH quicker.
Tim
Last edited by Timothy Morris
on August 27, 2007 19:29.