Post 1 made on Saturday July 21, 2007 at 16:37 |
joeh71 Long Time Member |
Joined: Posts: | August 2003 94 |
|
|
I tried installing my 8870 today, I got the 8811 protocall adapter wired in and installed but when I tried installing the T-Stat I could not get it to power up. I have 24 volts at the stat, I have the terminals wired correctly Red goes to RH with a jumper over to RC, white to white, yellow to yellow, green to green. The only other thing I could be missing is in the directions it says to jumper R to RC and C to... I guess back to the common terminal on the 24 volt powr supply??? Any thoughts???
Thanks Joe.
|
|
OP | Post 2 made on Monday July 23, 2007 at 12:42 |
joeh71 Long Time Member |
Joined: Posts: | August 2003 94 |
|
|
As I expected you also need 24 volts to terminal "R" and then "C" goes back to the common terminal of the 24 volt transformer. this is refered to as a "Five" wire thermostat. I will make those changes in the next day or two and post my findings as to the operation of the 9600 Aprilaire module.
Joe.
|
|
OP | Post 3 made on Thursday July 26, 2007 at 23:42 |
joeh71 Long Time Member |
Joined: Posts: | August 2003 94 |
|
|
I finally got around to pulling the new five conductor t-stat wire into the attic and getting the 8870 wired correctly... She powered right up and responded imediatly to the 9600's commands. Very cool!!! I plan on purchasing another 9600 for my bedroom system where this feature will be very nice. I know it's kinda lazy but but hey I think it's pretty cool to be able to check / change the temp. without having to get out of bed!!!
Best Regards, Joe.
|
|
Post 4 made on Friday July 27, 2007 at 03:48 |
sWORDs Long Time Member |
Joined: Posts: | November 2006 373 |
|
|
Joe, being lazy is what remotes are all about. ;)
|
|
|
Post 5 made on Sunday August 5, 2007 at 22:47 |
bluv69k Long Time Member |
Joined: Posts: | February 2006 31 |
|
|
where are the prontoscipts found. can you adjust the tstat in realtime or just setpoints?
|
|
Post 6 made on Monday August 6, 2007 at 00:25 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
The scripts are on the Philips Pronto site under the ProntoScript section (top right hand corner). In order to download, you must be a Level 1 Certified professional. http://www.pronto.philips.com
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.