Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Professional Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
How to reset a TSU9400 to default factory setting
This thread has 6 replies. Displaying all posts.
Post 1 made on Tuesday August 10, 2010 at 12:30
Andy Panda
Long Time Member
Joined:
Posts:
August 2010
31
I have an used remote with programs that I cannot use. How do I download the factory setting in PEP2
Andy
Post 2 made on Tuesday August 10, 2010 at 13:01
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
You open the Sample Configuration file that is available in the TSU9400 folder off the My Project folder and download it to your remote.

You can download the latest firmware for the remote from the Philips site or this site if it is posted. You will also want to download and install the latest PEPv2 software. There is a thread on the first or 2nd page of this forum that discusses the latest software.

[Link: remotecentral.com]
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Tuesday August 10, 2010 at 13:10
Andy Panda
Long Time Member
Joined:
Posts:
August 2010
31
Thanks for the reply, but the PEP v2 that I downloaded from Philips website does not contain my project or a folder that you speak off, do I have to download that manually ?
Andy
Post 4 made on Tuesday August 10, 2010 at 18:00
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
No, I don't think it requires separate download.

IIRC, when you open a project, there should be a folder named TSU9400 in the default location where you open the project. If not, navigate your hard drive until you find the location where PEPv2 was installed and look for the Sample configuration in a folder named TSU9400 there.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 5 made on Thursday August 12, 2010 at 12:01
Andy Panda
Long Time Member
Joined:
Posts:
August 2010
31
I looked and its not there. Would it be possible for you to send it to me via email.
Andy
Post 6 made on Thursday August 12, 2010 at 17:46
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Have a look in My Documents\Pronto Projects\TSU9x000.

There should be files there such as for the 9600?

Default TSU9600 EU MT.xcf
Default TSU9600 EU SR.xcf
...

or for the TSU9400

Demo TSU9400 Modern.xcf


Better yet, search your entire hard drive for .xcf files

I can email it to you if you cannot locate or you could try reinstalling PEPv2 and ensure that you select everything, including Galleries and Sample Configs, if by chance, you unchecked these boxes during the first install.

Let me know if you cannot find it. Email me at my yahoo account with a mailbox that can take up to a 5MB file if you need me to send, please.

Thanks,
Lyndel
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 7 made on Thursday August 12, 2010 at 20:15
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
You have mail at the addy on your profile.
Lyndel McGee
Philips Pronto Addict/Beta Tester


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse