|Post 1 made on Saturday November 21, 2009 at 09:52|
my English is not very good, but I try to write my best.
I recently Philips Pronto TSU9800 screen connected to the home automation and works perfectly.
Now I bought the AXIS 241Q video server and I downloaded the prontoscript for 241Q but no way to get it started, when I'm on the test page I put only "Communication OK" but I see no image.
the ip is 192.168.1.31 port 80
must be changed in the configuration of the AXIS 241Q?
to watch the streams?
thank you very much in advance
|Post 2 made on Saturday November 21, 2009 at 11:06|
You should go to the Axis browser and on the main page put a small v next to the line which says connect without Password. I believe that will do it
|OP | Post 3 made on Saturday November 21, 2009 at 11:54 |
thank you very much!
There is an option that can be activated,
that was it.
not be found without you,
the truth is hard to configure
and you go mad.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.