Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Professional Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
TSU9600 - Screen - Material/Protection
This thread has 3 replies. Displaying all posts.
Post 1 made on Wednesday November 15, 2006 at 13:11
arthurpotts
Long Time Member
Joined:
Posts:
November 2002
74
Does anyone know what the screen on the 9600 is made of? I can't tell whether it is glass or not.

With both my TSU6000 and 7000, I used a Palm screen saver (plastic film that sticks to the screen) to protect them from scratches and minimize the impact of finger prints. The only problem with this approach is that it does affect clarity a little and with the image on the 9600 being so good, I am reluctant to cover it, if it will stand up to the rigors of use.

Is anyone aware what the screen should be cleaned with (does Philips recommend anything)?
Post 2 made on Wednesday November 15, 2006 at 13:54
mburwen
Founding Member
Joined:
Posts:
August 2001
1,185
There are many film screen-savers that do not affect clarity. I buy the least expensive ones I can find on eBay and have never been disappointed. On the "glass", a damp cloth works well, but if you want the ultimate, get the "Sprayway" brand of spray of glass cleaner which is not abrasive, is safe on plastics and doesn't have ammonia in it (the primary ingredient in Windex). Costco carries it. This is also a great product for cleaning the faces of your TVs and the glass of your scanners.
Post 3 made on Wednesday November 15, 2006 at 19:52
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
It's not glass, it's some sort of plastic. As far as cleaning, a lint-free cloth works well. I usually clean mine with a flannel rag.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 4 made on Thursday November 16, 2006 at 18:25
SOUND.SD
Loyal Member
Joined:
Posts:
April 2006
5,523
Hi Arthur-

I would treat it like a Plasma.

Micro-Fiber cloth only. If you must use a solution there was a good write up in Sound and Vision about using 1/2 water 1/2 alcohol (i think). I dont remember the exact solution but you may be able to find the article.

Also, I hear the 9600 screen is made from a scratch and break resistent material.


Enjoy.
Bulldog AV - San Diego, CA
www.bulldog-av.com
[Link: facebook.com]


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse