|
|
|
Philips Pronto Professional Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | RFX9400 IR Blaster? This thread has 5 replies. Displaying all posts. |
|
Post 1 made on Monday November 13, 2006 at 15:58 |
waza04 Long Time Member |
Joined: Posts: | November 2006 23 |
|
|
Hello Guys, Are the IR transmitters included in the RFX9400 high power blasters, or can they only be used next to the device they are going to control?
|
|
Post 2 made on Monday November 13, 2006 at 18:16 |
Peter Dewildt Loyal Member |
Joined: Posts: | July 2001 6,307 |
|
|
There is no IR blaster on the RFX9400.
It uses wired IR Emitters - that is, you can connect up to 4 cables each of which has two IR emitters at the other end. These emitters are stuck over the IR receiver for each piece of equipment. A total of 8 devices can be controlled (even more if you buy some Xantech stuff).
|
Peter Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired) Pronto 2xTSU9600, RFX9400 |
|
Post 3 made on Monday November 13, 2006 at 18:37 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
I am going to try the individual blasters from Niles, to see if the RFX9400 has enough milliamp output to drive them. If so, you can just plug in a few of the Niles blasters and cover a whole cabinet with one, possibly two blasters. It is much easier to install and so much neater looking.
Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
OP | Post 4 made on Tuesday November 14, 2006 at 09:41 |
waza04 Long Time Member |
Joined: Posts: | November 2006 23 |
|
|
Exactly, I can control all my devices from the single Pronto - however sometimes my hands block the signal etc...
Im thinking that if I install an extender and mount it across the room from the equipment and point a blaster at it I have a well positioned never disturbed IR sender.
|
|
OP | Post 5 made on Tuesday November 14, 2006 at 09:42 |
waza04 Long Time Member |
Joined: Posts: | November 2006 23 |
|
|
...I also assumed thats why there were DIP switches on the extender to control the IR power.
|
|
OP | Post 6 made on Monday November 20, 2006 at 14:14 |
waza04 Long Time Member |
Joined: Posts: | November 2006 23 |
|
|
Any idea on the power of these outputs? I tried emailing philips but their prontoteam email address appears to be bouncing.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|