| Post 1 made on Thursday May 24, 2007 at 21:59 |
TSU9600 and RFX9400 and Keydigital Matrix Switcher (KD-MSW8x4Pro).
I have the IR codes entered and a code page for this device. I have unhid the code page to test the codes and can page through on the pronto to test the code on the codes page. All the codes work. But when I use the codes in a macro they don't work. I have used as much as a 1 second delay between commands and no luck. Has anyone had any luck with the switcher codes?
|
|
| Post 2 made on Monday May 28, 2007 at 03:31 |
tgrugett Select Member |
Joined:
Posts: | August 2004
1,850 |
|
|
Check you page and/or button configurations including your routing assignments.
|
|
|
| Post 3 made on Monday May 28, 2007 at 05:34 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,997 |
|
|
You may also want to adjust the 'Duration' on these codes. The symptoms you describe lend themselves to needing a longer duration.
Can you post one of the learned codes?
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
