I just for the TSU9800.

Having a problem.

I have a Sony STR-DA5200ES receiver.

I attempted to learn the codes from the Sony Receiver and use them on the TSU9800.

When I use the TSU9800, it does not work with the Sony unit.

Any ideas?

I has TSU7000 in which I learned the same codes and it work fine.

I also tried to copy and paste the codes from TSU7000 to the TSU9800 and it still does not work...

I don't know how to proceed...

The TSU9800 does work with other devices (Direct TV HR21).

Thanks,
Akash

This is a known problem with Sony equipment. You need to adjust the duration. Try searching for more information.

Hi Akash,

I converted from TSU3000 to TSU9600 with a Sony DB930. Everything worked fine. All codes had a set durration. I recently got a DA4400ES. No codes worked so I relearn all codes. All the learned codes worked great when pushing the buttons manually on the 9600. But some of them (input selections) didn't work in macros. I found that I had to set the duration to the default for these.

Herb

Sony codes want to see a total elapsed time (all codes plus trailing off time) of at least 45 miliseconds. If a code is shorter than this duration and another code comes too quickly it may not be recognized.