Post 1 made on Tuesday February 17, 2009 at 19:05 |
bert003 Long Time Member |
Joined: Posts: | January 2008 77 |
|
|
I have an old Pronto RU950 and the IR codes of all my 15 remote controls are stored in there. Now I can copy all code from the RU950 to the TSU9400 or choose to relearn them again. Is there any reason to learn all code again?
Thanks, Bert
|
|
Post 2 made on Tuesday February 17, 2009 at 22:28 |
Peter Dewildt Loyal Member |
Joined: Posts: | July 2001 6,307 |
|
|
No. But you need to carefully follow the instructions for migrating your config to PEP V1.1 then to PEP V2.
|
Peter Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired) Pronto 2xTSU9600, RFX9400 |
|
OP | Post 3 made on Wednesday February 18, 2009 at 04:51 |
bert003 Long Time Member |
Joined: Posts: | January 2008 77 |
|
|
Thanks. It looks like my RU950 learns the codes a bit easier than my TSU9400. And sometimes I get a different code in the 9400, even after several attemts. So I thought the code would be stored in a different format.
Does anyone know where the learn eye in a 9400 is located exactly? Maybe the same trick can be done as with the 9600.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.