| Post 1 made on Saturday January 31, 2009 at 08:57 |
Pambs Long Time Member |
Joined:
Posts: | January 2007
54 |
|
|
Hi guys, i had a remote programmed for me 2 years a tsu9600 but i'm thinking of getting a 9400 now. how can i copied the existing files to my new remote? or is there a way to load the existing files via a PE and then download them to the 9400?
|
|
| Post 2 made on Saturday January 31, 2009 at 22:33 |
buzz Super Member |
Joined:
Posts: | May 2003
4,383 |
|
|
Pambs,
Unlike earlier models, there is no way to extract a program from a TSU9600 or TSU9400. You'll need to track down the original 9600 file.
Note that, while the TSU9600 program will run on a TSU9400, you'll need to redo the artwork.
|
|
| Post 3 made on Saturday January 31, 2009 at 23:48 |
Zephyr007 Long Time Member |
Joined:
Posts: | October 2002
213 |
|
|
If you have a copy of the file you can work with it but your original file would have been built in Pronto Edit 1.X if you pull it into pronto edit 2.0 software there are some differences with the way the code database works.
The graphics will also need to be completely reworked due to the difference in resolution and screen orientation.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
