| Post 1 made on Thursday January 29, 2009 at 18:33 |
mariomp Loyal Member |
Joined:
Posts: | November 2006
5,681 |
|
|
Recently got the Panasonic's 511 IP camera only to realize that it didn't come with power supply.
As I don't have any POE switches/routers, I had to hunt for an adaptor.
Radio Shack had one but I had to buy a power supply with it only to cut it off a foot from the plug and toss the rest.
My question is, where do you get the Adaptaplug D type of plug with a lead from?
Mario
|
|
|
| Post 2 made on Friday January 30, 2009 at 00:32 |
gopronto Senior Member |
Joined:
Posts: | April 2008
1,453 |
|
|
so far i have only found it from panasonic, its a pain that you have to buy the PSU as a seperate item.. and its expensive!
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
| Post 3 made on Friday January 30, 2009 at 03:04 |
Zephyr007 Long Time Member |
Joined:
Posts: | October 2002
213 |
|
|
If the camera will run on POE power there are a many companies that make POE injectors, that can be placed back at your router/switch location. Of course if you end up needing several for multiple cams then you might as well just get a POE switch. [Link: linksysbycisco.com][Link: versatek.com][Link: dlink.com]
|
|
|
| Post 4 made on Friday January 30, 2009 at 17:55 |
Kevin Magee Long Time Member |
Joined:
Posts: | November 2006
135 |
|
|
If you use a POE injector make sure you use one that will work. One I purchased did not work. I use this one. [Link: amazon.com]
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
