|
|
|
The following page was printed from RemoteCentral.com:
Topic: | RFX9600 Receiving Commands from External Source This thread has 43 replies. Displaying posts 31 through 44. |
|
Post 31 made on Monday January 17, 2011 at 16:46 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Scott,
FYI, I still know I owe you some time/feedback if you still need it. I have to apologize as I have been swamped since the middle of december (day job duties) and have not even done work on my own system.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 32 made on Monday January 17, 2011 at 23:14 |
ScottGrimes Long Time Member |
Joined: Posts: | April 2007 78 |
|
|
On January 17, 2011 at 16:46, Lyndel McGee said...
Scott,
FYI, I still know I owe you some time/feedback if you still need it. I have to apologize as I have been swamped since the middle of december (day job duties) and have not even done work on my own system. No worries. Whenever you get the chance would be great. I know what you mean about no time... Besides my regular day job, I create MS Access Databases on the side (custom graphic interfaces and lots of VB programming) and have a busy 2 year old at home... another one due at the end of June. I have not had much time for my remote either. So it's been very slow replacing some of the graphics I borrowed with new ones I've created. I am learning new tricks in Photoshop every day... see pics below. The actual Photoshop images (600 x 600 at 300 dpi) look much better than the ones below which are compressed (jpg files). The popcorn kernels are simply generic ones found on the web... may eventually take a stab at creating them from scratch. Still working on the reflective surface of the CD.
|
Scott Grimes Liquid Designs [email protected] |
|
Post 33 made on Monday January 17, 2011 at 23:19 |
ScottGrimes Long Time Member |
Joined: Posts: | April 2007 78 |
|
|
On January 17, 2011 at 15:50, sWORDs said...
Almost everything you need to start using the RFX from another source is in this topic. I stopped posting because of the whining. The stuff you are doing is way beyond my technical knowledge. I'll have to do some serious research in order to figure this out... but I do like a challenge. Now, I just need to find the time. Thanks, Scott
|
Scott Grimes Liquid Designs [email protected] |
|
Post 34 made on Wednesday January 19, 2011 at 17:18 |
sWORDs Long Time Member |
Joined: Posts: | November 2006 373 |
|
|
Scott,
I just noted that in the reply that I send you RTFM was included. Just wanted you to know that's part of the objective c quote (the guy I qouted was saying that about himselve), not of my writing.
|
|
|
Post 35 made on Friday July 29, 2011 at 00:20 |
gopronto Senior Member |
Joined: Posts: | April 2008 1,453 |
|
|
bump..
Has any one got any further with the protocol talking to the RFX 9600
|
Pronto still one of the best Wi-Fi Remotes, www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control |
|
Post 36 made on Friday September 16, 2011 at 06:14 |
gopronto Senior Member |
Joined: Posts: | April 2008 1,453 |
|
|
|
Post 37 made on Sunday November 27, 2011 at 08:47 |
pjjameso Long Time Member |
Joined: Posts: | April 2008 73 |
|
|
Another bump... Getting a Transformer Prime for Christmas and would like to port control of the RFX 9600 to android OS. Any further progress from anyone?
|
Paul |
|
Post 38 made on Sunday November 27, 2011 at 14:50 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Paul,
For relays, power sense, and 232, might be possible. However, for IR data, not likely.
But, if you need IR and know you will have to convert the Pronto IR Code data to some other format, why not just invest in a Global Cache GC-100 12 which gives you serial ports, relays, and 6 IR ports? Plus, with this configuration, you get true asynchronous 232 as the serial ports communication done using TCP/IP.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 39 made on Friday December 2, 2011 at 06:16 |
sWORDs Long Time Member |
Joined: Posts: | November 2006 373 |
|
|
Learned IR commands are no problem. It's just the database commands that are almost impossible to do based on the encryption. However I do agree with Lyndel that GC is a much easier way.
|
|
|
Post 40 made on Saturday December 3, 2011 at 16:23 |
johanj Long Time Member |
Joined: Posts: | January 2008 52 |
|
|
sWORDs, that are very good news for me. I use a TSU 9400 + RFX 9600 today but are really not using the 9600 for a lot of equipment. Just IR for input/volume on amp plus on/off projector. All all learned commands. I mainly use Squeezeboxes for music and MediaPortal on the HTPC:s for TV/Movies/Series, they can all be controlled with tcp/ip. I plan to move to IPad running CommandFusion for controlling the Squeezeboxes and MediaPortal. I have joined the open source EVE project for development of the MediaPortal module: [Link: forum.team-mediaportal.com]I'm still hoping that I will be able to use the RFX also with the IPad for the amp and projector. sWORDs could you post an example of how to send a learned IR code with the RFX or send me some more information in PM. Cheers, Johan
|
|
Post 41 made on Monday February 18, 2013 at 05:41 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
I pop in every now and then and hopefully one day see that there is an app that is able to utilise the rfx9600 for the Apple/Android.
|
Thanks
Frank |
|
Post 42 made on Wednesday October 22, 2014 at 19:09 |
Jac42 Lurking Member |
Joined: Posts: | October 2014 2 |
|
|
Hello guys! many times I visited the forum and I joined at last.
But go to the point, I've tried to find some doc or something which describe exactly protocol of the transfer between Pronto TSUxxxx and RFXxxxx... Have no idea where I can find it. I belive, that not only me have to move from TSU to eg. iPad. I can do it by myself but need to know the protocol how to use it.. I saw posts of sWORDs - it is realy good work but .. you know. If possible I need more details. Thanks!
|
Philips Pronto user 2xRFX9600 + 3xTSU9600 in my home. It is shame Pronto is no longer on the market! So let's do something to use RFX with iPad ) |
|
Post 43 made on Wednesday October 22, 2014 at 23:59 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
The protocol is not public. All communication is via UDP and discovery is done via SSDP. If your Pronto uses Protected Database codes, you will have no way to decipher them unless you have the key to unlock/decrypt them and to my knowledge, that is not available. These 2 threads may give you some more info. [Link: remotecentral.com][Link: remotecentral.com]
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 44 made on Thursday October 23, 2014 at 08:32 |
Jac42 Lurking Member |
Joined: Posts: | October 2014 2 |
|
|
Thanks Lyndel, those threads are helpful for me at this stage.
|
Philips Pronto user 2xRFX9600 + 3xTSU9600 in my home. It is shame Pronto is no longer on the market! So let's do something to use RFX with iPad ) |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|