Fru
Cover art, artist, song info, elapsed time are all part of the pre written interface which has all of the appropriate graphics on the pages. all of the control functions for the Escient that are used in this interface are already assigned and are delivered across the network. the only ir codes and page you should need to add would be for non player functions like record, setup, options, etc which would be used along with a video output when adding music, editing titles, building playlists and groups, etc. These functions you would need to run in ir, either line of site or through the extender. I simply have a separte page labelled Escient Setup that is used when I need to perform any of these functions.

Fru,

You don't add a standard device, you right-click on the "Home" icon in the tree view and select "Insert Escient Music Server". This inserts a device that communicates with the Escient across the network. For other setup-based functionality, you'd have to use the IR-based device you are using now. Remotecollector spoke of this in his post above.

Hello!
Now i have configured my Escient 160i with dlan and ethernet and the network connection works but i cannot get internet connection with the escient.
i have a static IP Adress and on the test screen the escient makes DHCP connection and says DHCP Server name not found..
How can i disable DHCP?
thanks for your help,
fru

DNS???

DNS Server is right configured..
I found out that the problem was the d-lan wireless connection.
if i put the ethernet cabel directly in everythings fine..
i have to configure the d-lan adapters..
thanks,
fru

Fru,

You cannot see movie info on the 9600 at this time, only music.