This is a question for those people using the Aprilaire module. I have the module working but since I have multiple thermostats, I need to change the thermostat # on the parameters page each time before the Page_1 screen. Does anyone know how I can change it from another page? I also want to create a page that has all the temperatures in the different rooms on one page so I use a loop from 1 to 12 which is the number of thermostats I have but I only want to retrieve the room temperatures and not the heat and cool set points and status of the controls. Any help would be greatly appreciated.

I have 4 Thermostats, each fully loaded with remote sensors. I have modified the standard ProntoScript to have a summary page listing my three floors (I have three zones). When you press the button corresponding to a floor on the summary page, you get to a floor page listing the thermostat temp for that floor, as well as all the remotes connected to it (essentialy one sensor per room). On the floor page, there is a button which brings you to a thermostat page allowing you to control the thermostat itself. In case you are wondering what the 4th thermostat is doing, it is not controlling HVAC per se, but it allows communication with additional remote sensors.

I could send you a stripped down version of my file (9400) so you can have a look.

Paul

That would be great. I am looking to create the summary screen and might try to add the room temperatures to that page. You can just email it to the address in my profile.

I am interested in getting the thermostat of my home working thru the TSU9600. Does anyone have any opinions of the Aprilaire thermostats? Also, where would one get the modules for the TSU? Thanks.

To get Aprilaire module, you go to philips site and become Level1 Certified (requires registration and taking an online test). Once you have completed this, you can download the module.

Thank you very much.

Has anyone any experience with the Aprialaire thermostat? I was wondering how well this works.

I did one about 1 year ago, on a TSU9600 using the Aprilaire script with one of their thermostats. Sorry, don't recall the number right now. But is has been working perfectly since day one with two-way support. You can see the temperature on the screen and raise and lower air or heat.

Dave
RemoteQuest.com