 |
 |
|
|
Philips Pronto Professional Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | 8300HD Codes Don't Work This thread has 4 replies. Displaying all posts. |
|
| Post 1 made on Saturday January 13, 2007 at 11:46 |
Dawn Gordon Luks Founding Member |
Joined:
Posts: | September 2001
1,178 |
|
|
I know that some of you have been having problems with the Manufacturer database library, but I was pretty surprised to find that the codes for the SA 8300HD just don't work.
Now tell me if I'm wrong, but the create channel macro feature will only work with manufacturer supplied codes, right? So, unless I can find a way to get the 8300HD codes working this cool feature is pretty worthless .
I'm using the 1.0.37.0 version of PEP with the latest 9600 firmware.
Dawn
|
|
| Post 2 made on Sunday January 14, 2007 at 10:20 |
Sylvain Founding Member |
Joined:
Posts: | January 2002
294 |
|
|
I have found the same issue with the SA 8300HD codes. And you are right about the channel macro feature; you need valid IR codes for the function to work.
However, it can easily be fixed: download SA 8300HD codes from this site, import to Pronto Edit Professional, copy the 8300HD codes to your "My Database" and then re-assign the newly imported codes to the device.
Make sure you check for function name mismatch though as some dowloaded files will not call the same function exactly the same (like FF will not assign properly to F.Fwd or to Fast Fwd and so on). I recommend a one by one check of the code page after a re-assignment.
Once the re-assignment above is done and checked, you can go back and (re)perform the channel code macro to have good codes assigned to buttons.
|
|
| OP | Post 3 made on Monday January 15, 2007 at 08:52 |
Dawn Gordon Luks Founding Member |
Joined:
Posts: | September 2001
1,178 |
|
|
Sylvain,
Hey, that worked, thanks!
Dawn
|
|
| Post 4 made on Monday January 15, 2007 at 21:35 |
Sylvain Founding Member |
Joined:
Posts: | January 2002
294 |
|
|
Glad to hear that it worked Dawn. I had been there too obviously...
|
|
| Post 5 made on Tuesday January 16, 2007 at 12:09 |
Hmbucker Long Time Member |
Joined:
Posts: | November 2006
25 |
|
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
