Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Professional Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
RFX9400
This thread has 7 replies. Displaying all posts.
Post 1 made on Wednesday January 3, 2007 at 22:49
angel herrera
Long Time Member
Joined:
Posts:
February 2006
10
i program the pronto remote went i select rf in main system
the pronto locks not respond to jump of the main page
only went i select the rf in the setting. i try to select
different id i not have network only regular system.
mx850 universal remote
Post 2 made on Wednesday January 3, 2007 at 23:48
remotecollector
Long Time Member
Joined:
Posts:
January 2006
140
I am not sure exactly what you are asking but I will try to help. If you have a macro on a button and any of the actions involved are using rf devices(wifi) and the remote cannot see the designated extender (either on the network or standalone), the macro will not run and your page jump cannot be executed. If the button only contains a page jump, it will work, connected to the extender or not. If this is what you are experiencing, you most likely have not properly configured your extender and/ or the device properties of the TSU9600, or the devices in your .xcf. I hope this is what you are trying to ask, if not, please try to help me understand exactly the problems you are having.
Post 3 made on Thursday January 4, 2007 at 00:02
Peter Dewildt
Loyal Member
Joined:
Posts:
July 2001
6,307
If you see "Connecting" at the top of the screen (assuming you have not removed this system item) it has not connected to the 9400. Your Pronto will lock up if you try to something using WiFi.
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400
Post 4 made on Thursday January 4, 2007 at 17:21
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Angel,

You have not supplied near enough information to help us solve your problem.

1. Are you using the Extender in Standard or Network mode?
2. If in Network mode, did you assign a dedicated IP address?
3. If in Network mode, what is the network configuration you have chosen on the TSU9600? Is it WEP, DHCP, etc...

In order for us to help, we need to know these types of details.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 5 made on Thursday January 4, 2007 at 21:17
angel herrera
Long Time Member
Joined:
Posts:
February 2006
10
mr.mcgee
1- i try to use the extender only standard not network
2- my pronto look up went i select rf extender in main system properties
3- or in main home system properties my remote no respond went i s
4- the extender in main home page the pronto remote look-up
5- mr.mcgee i doing samthing wrong to configration the standard
6- rfx9400.
mx850 universal remote
Post 6 made on Thursday January 4, 2007 at 23:43
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
Angel,

I assume the following based on your response. The TSU9600 is configured for Standalone, and not Network mode.

1. Is the RFX9400 also configured for Standalone mode?

2. Is the RFX9400 configured to use both the same Channel ID and Extender ID as those that you have set in the config file's system properties?

That is, you set the Channel ID to either 1, 2, or 3 in the System Properties and then on the Extenders tab, you choose a value 0-F which is the hexadecimal representation of 0-15. Does your RFX9400 match what you have set for both of these? Do you have the switch on the back of the RFX9400 set for 'Standalone' mode?

3. The RFX9400 is not an IR Blaster like previous extenders, therefore, you must use the IR emitters supplied with the extender to transmit IR. Are you using the emitters?

4. If you've successfully verified all the above, have you tried changing the output level for the emitters using the DIP switches from normal to low?
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 7 made on Friday January 5, 2007 at 00:23
Peter Dewildt
Loyal Member
Joined:
Posts:
July 2001
6,307
You may need to turn the RFX off and on to get it to connect. The lights do something while attempting to connect then once connected. I'm at work and can't remember exactly what.
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400
OP | Post 8 made on Friday January 5, 2007 at 09:37
angel herrera
Long Time Member
Joined:
Posts:
February 2006
10
mr mcgee
1 yes i select the id 0.to different id is the same in my conf. program
2 i use the ir emitter 2 pair was inside the exterder box rfx9400 i select alone in
back of the extender also in switch pronto channel is number 1 also in my
program is the same . wy my pronto look-up
mx850 universal remote


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse