Your Universal Remote Control Center
RemoteCentral.com
General Pro Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Marantz AV7702 MK II
This thread has 10 replies. Displaying all posts.
Post 1 made on Wednesday July 14, 2021 at 12:48
dben55
New Member
Joined:
Posts:
July 2021
4
I'm trying to add a Marantz AV7702 MK II to an existing Procontrol 24.r system but the Marantz is not included in the device listing. I tried the general Marantz stereo receiver but it did not have the functionality needed. I then tried a Denon and then an Anthem AV device template but neither were recognized by the Marantz after downloading. Any advice would be greatly appreciated.
Post 2 made on Thursday July 15, 2021 at 17:55
Redbiker98
Regular Member
Joined:
Posts:
November 2020
109
How are you controlling the Marantz? IR emitter? IR line of site? RS-232? IP? The Denon commands should work just fine if you have clean communication. Marantz stereo unit codes would not work on an AV unit, except maybe power.
OP | Post 3 made on Friday July 16, 2021 at 09:33
dben55
New Member
Joined:
Posts:
July 2021
4
I'm using the ProLink.r processor. The Marantz didn't respond to the Denon codes. Any other suggestions?
Post 4 made on Friday July 16, 2021 at 13:16
Redbiker98
Regular Member
Joined:
Posts:
November 2020
109
OK, you are using the ProLink.r, but how is it communicating to the Marantz unit? Do you have the right output selected in the software?
OP | Post 5 made on Friday July 16, 2021 at 13:48
dben55
New Member
Joined:
Posts:
July 2021
4
I'm using an IR emitter. The emitter worked with the broken Pre-Amp so there is no reason to believe anything has changed. All of the other devices are connected to the Marantz via HDMI and to the ProLink.r using IR emitters. I hope this answered your question correctly. If not please explain further.
Post 6 made on Friday July 16, 2021 at 16:15
Redbiker98
Regular Member
Joined:
Posts:
November 2020
109
Some possible problems: IR emitter located in wrong location, IR emitter not assigned correctly in software, IR emitter is defective.
Post 7 made on Saturday July 17, 2021 at 12:45
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,704
But would Denon IR codes actually work? Marantz products always uses Philips RC5/Ext format. Denon products historically use Sharp format.
OP | Post 8 made on Saturday July 17, 2021 at 13:00
dben55
New Member
Joined:
Posts:
July 2021
4
I don't see the Philips RC5/Ext format on the device list either. Am I missing something?
Post 9 made on Sunday July 18, 2021 at 17:45
Redbiker98
Regular Member
Joined:
Posts:
November 2020
109
Once Marantz started sharing units with Denon they switched over to the same code sets.
Post 10 made on Friday July 23, 2021 at 21:27
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,704
Okay, but would that include the 7702mk2 from 2015? I own the 7702 non-mk2 thatís only a year older and only differs in HDMI chip, and it definitely uses Marantz codes. I also have a NR1710 from 2019 which still uses Marantz format.
Post 11 made on Saturday July 24, 2021 at 14:09
Dundas
Founding Member
Joined:
Posts:
April 2002
320
On July 18, 2021 at 17:45, Redbiker98 said...
Once Marantz started sharing units with Denon they switched over to the same code sets.

This not correct. The AV7706 and other current Marantz products still use the same IR codes.
Scroll to the bottom of this page to download the latest IR code spreadsheet:
[Link: marantz.com]


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse