Your Universal Remote Control Center
RemoteCentral.com
General Pro Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Meraki MX450 SFP WAN
This thread has 1 response. Displaying all posts.
Post 1 made on Monday January 20, 2020 at 03:10
ChristianHunter
Junior Member
Joined:
Posts:
January 2020
1
Hello Experts. I'm attempting to install an MX450 and the ISP provides a copper RJ45 connection. Unfortunately that's all they offer. The MX450 only has 2 WAN SFP+ ports. The distance between my demarc from my ISP and the rack is roughly 135 feet. Traditionally the equipment supported a Cat6 cable, however with the meraki I'm not sure what I need.

I've tried a copper to SFP transceiver but that only gets the port to flash orange intermittently, every 4-5 seconds. I tried a powered media converter to spit out an SFP cable, however that doesn't light up at all.

Cisco has offered a specific model of transceiver but I'm almost a week out as all local distro's don't have it in stock. Anyone know of a solution here? Any help would be appreciated.

Thanks in advance
Post 2 made on Monday January 20, 2020 at 04:16
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
You're in the wrong place, the only mx450 we deal with here is universal remote control.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse