Your Universal Remote Control Center
RemoteCentral.com
General Pro Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
execute a HEX code from ir signal
This thread has 4 replies. Displaying all posts.
Post 1 made on Tuesday July 1, 2014 at 05:25
alsamaraee
Lurking Member
Joined:
Posts:
October 2013
3
How can i execute a HEX code from ir signal captured by oscilloscope ?

e.g.

Post 2 made on Thursday July 3, 2014 at 02:54
gopronto
Senior Member
Joined:
Posts:
April 2008
1,444
you can do it , but far easer to use a Pronto to capture the code and display in hex format.
Pronto still one of the best Wi-Fi Remotes,
www.ikonavs.co.nz and [Link: prontoprojects.com] Axium Control catching up fast :)
OP | Post 3 made on Sunday August 31, 2014 at 05:32
alsamaraee
Lurking Member
Joined:
Posts:
October 2013
3
Can you be more specific ? can you tell me how?
Post 4 made on Saturday September 6, 2014 at 14:54
Ernie Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
29,935
Buy a Pronto on ebay. Get the programming software on this site.

Once you have the Pronto, post again here and send me a private message. I'll tell you what to do next. I don't visit this forum too often and I would not want to get you started without helping later.

Imagine looking at a scope and trying to tell if you are seeing the sound of a saxophone or a guitar; it would take immense amounts of training and skill, but the ear can do it with very little training. What you have on the scope is so completely abstract compared to a hex command... or perhaps it's the other way around... that you need a device designed to interpret and reproduce the command. The Pronto does that.

I program remote controls for clients and I always carry a Pronto TS-1000 (that's the US model of the first generation of Prontos) with me.
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw
Post 5 made on Tuesday September 9, 2014 at 12:20
mdavej
Active Member
Joined:
Posts:
December 2002
627
Excellent post.

I'd like to add the same thing can be accomplished with a $10 JP1 remote and $8 interface cable or an IRWidget plus free IRScope software.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse