Your Universal Remote Control Center
RemoteCentral.com
Other Philips Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Philips Universal Remote SRU5150
This thread has 5 replies. Displaying all posts.
Post 1 made on Monday April 20, 2009 at 10:04
D4U
Lurking Member
Joined:
Posts:
April 2009
3
Hi,
I have Philips Universal remote SRU 5150 which has a single RED button for 'ON' and 'OFF' and have a Yamaha Amplier which remote has separate button for ON and OFF. is there any spare button on the Philips remote that can be programmed to set as 'OFF' as i have tried with Learning key on Philips but it can be operated in one way i.e if it gets 'ON' it cannot be made 'OFF and vice versa.


regards
D4U
Darshan
Post 2 made on Monday April 20, 2009 at 23:39
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,704
Does the SRU5150 have the Yamaha in its database? There may be a power toggle code. Otherwise, if it's not in the database and you don't have access to such a code elsewhere, you might just have to use 2 keys for those functions.
OP | Post 3 made on Tuesday April 21, 2009 at 04:33
D4U
Lurking Member
Joined:
Posts:
April 2009
3
Hi,
Yes Yamaha is in the database, where to search for power toggle keys or how can i program 2 keys for this function.

regards
D4U
Darshan
Post 4 made on Tuesday April 21, 2009 at 15:17
djy
RC Moderator
Joined:
Posts:
August 2001
34,191
With only a power toggle button on the Philips, I would imagine that all the database entries would utilise power toggle codes rather than discrete on/off codes, which by definition would require two buttons.

Following the instructions for Learning key functions just learn the on code to, say, the POWER button and the off code to the FAV button; chosen only because of it's being directly below the power button and easy to remember. Obviously if you need that button for something else, just use any "redundant" button, assuming of course there is one.
OP | Post 5 made on Friday April 24, 2009 at 10:01
D4U
Lurking Member
Joined:
Posts:
April 2009
3
Hi,
I have got a STB KAON device, the remote is able to detect the DISH TV by selecting AV button on the SRU 5150 remote but i am unable to change any channels of the Dish TV. I tried to Learn the channel up and down key but still unable to change the channel. what could be the issue.

regards
D4U
Darshan
Post 6 made on Friday April 24, 2009 at 15:29
djy
RC Moderator
Joined:
Posts:
August 2001
34,191
This may sound a bit obvious, but having selected the TV input are you remembering to change the 5150 device setting to operate the STB?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse