Your Universal Remote Control Center
RemoteCentral.com
Other Philips Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Help on identifying IR protocol
This thread has 2 replies. Displaying all posts.
Post 1 made on Wednesday February 23, 2011 at 04:03
Ironic
Lurking Member
Joined:
Posts:
February 2011
2
Don't know if this is correct place for this but here goes:

Horizontal divisions are 2ms.

It´s the inverted output from a tsop1736.

Having trouble on identifyng correct protcol since all protocolls from [Link: sbprojects.com] have or a Leader pulse, or a start bit .
However this one start's with a short pulse.

It's from a Set Top Box, of Scientific AtlantabBrand, that somepeople say uses RC6.

Any ideias?

Thank You
Post 2 made on Thursday February 24, 2011 at 02:02
3FG
Select Member
Joined:
Posts:
August 2009
1,857
It will help if you can capture of a complete signal, and calculate/post the overall duration (time). Also measure the modulation frequency of the signal before it runs through the decoder.

If the waveform above is an accurate representation of the beginning of an IR signal, it is not RC6, but it plausibly is RC5.

By the way, normally we try to measure the durations of burst pairs. Witha complete set of durations from one or more signals, it is usually practical to infer the protocol. A partial pictorial snapshot doesn't really have enough information.
OP | Post 3 made on Thursday February 24, 2011 at 02:17
Ironic
Lurking Member
Joined:
Posts:
February 2011
2
If i keep pressing the button it repeats itself every 100ms

it also seems like RC5 to me, but if so, the start bit is 0, instead of usual 1, and there is no toggle bit.

also, there is a strong variation in pulse width. around 20/30%.

Tks for input


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse