Your Universal Remote Control Center
RemoteCentral.com
Original Equipment Remotes Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 2
Topic:
replace original sony remote
This thread has 20 replies. Displaying posts 16 through 21.
Post 16 made on Saturday January 12, 2013 at 05:18
freskeer
Lurking Member
Joined:
Posts:
January 2013
3
Sorry about the lack of description, but thanks for the quick response.

STR-DN1000 reciever
with a
RCRP05BR (R31794...) remote

I'm trying to make buttons to switch the the respective HDMI inputs (1,2,3,4). I tried the EFC's above for a number of other codes which mostly worked. I'm not sure what the 40 means in the 5th column, but all the ones with 40 don't seem to work.
Post 17 made on Thursday January 24, 2013 at 09:19
freskeer
Lurking Member
Joined:
Posts:
January 2013
3
Anybody? Help would be greatly appreciated.
Post 18 made on Friday January 25, 2013 at 00:25
3FG
Select Member
Joined:
Posts:
August 2009
1,861
I'm very sorry; somehow I  missed your reply.  The EFC list in post #8 had a mistake whenever the Sony20 protocol is used.  I've corrected the EFCs and improved the formatting.  Please try the new EFCs for HDMI.
Post 19 made on Sunday February 1, 2015 at 23:49
gregjsmith
Lurking Member
Joined:
Posts:
November 2005
3
3FG thanks so much for this. My OEM remote for the STR-DN1000 died. I bought a universal and was able to program the controls I needed.

On September 13, 2010 at 01:28, 3FG said...
OK, here's a start for the Sony.
Use setup code Audio 2172, and make sure the remote is in Audio device mode.

You can test any of the below functions by tapping Setup and entering any 5 digit EFC. When the 5th digit is pressed, the IR signal will be sent.

You can semi-permanantly assign an EFC to a button by (again in Audio device mode):
1) Press Setup until 2 blinks
2) Enter 994 (2 blinks)
3) Tap Setup
4) Enter the 5 digit EFC
5) Tap the button to be assigned to.  (success indicated by 2 blinks)
The 9XX Command instructions give more detail.
Below are function name, EFC, and IR protocol information.  Probably not all functions are listed; see the Sony IR function list fo other possibilities.  Post missing ones, and I'll convert those to EFCs.  Of couse, some of the below functions are already programmed into 2172.

FunctionEFCprotocoldevicesubOBC
0/1048841Sony1548none9
117097Sony1548none0
216073Sony1548none1
316585Sony1548none2
415561Sony1548none3
517353Sony1548none4
616329Sony1548none5
716841Sony1548none6
815817Sony1548none7
949865Sony1548none8
vol up32969Sony1548none18
vol down31945Sony1548none19
muting33737Sony1548none20
preset up33481Sony1548none16
preset down32457Sony1548none17
power32713Sony1548none21
select50121Sony1548none12
resolution43208Sony20164042
return63434Sony20168125
menu/home28104Sony15176none119
HDMI Toggle26056Sony20164055
HDMI Output B58824Sony20164063
HDMI Output A59848Sony20164062
HDMI 433992Sony20164019
HDMI 335016Sony20164018
HDMI 234504Sony20164017
HDMI 135528Sony20164016
gui mode36041Sony1548none83
up arrow62152Sony15176none120
down arrow61128Sony15176none121
left arrow61640Sony15176none122
right arrow60616Sony15176none123
options29898Sony20168115
-/-- Clear28105Sony1548none119
ent/mem49609Sony1548none14
display52425Sony1548none75
night mode08904Sony15176none32
sleep13001Sony1548none96
play26826Sony2016850
pause59082Sony2016857
rewind25802Sony2016851
fast fwd27594Sony2016852
stop60106Sony2016856
input mode25288Sony15176none48
2ch/a.direct20168Sony15176none65
a.f.d.20680Sony15176none66
movie19656Sony15176none67
music52936Sony15176none73
dmport27336Sony20164048
xm02760Sony20164024
next track26314Sony2016849
prev track27338Sony2016848
category -43466Sony2016846
category +42442Sony2016847
video 108393Sony1548none34
video 265993Sony1548none30
bd35272Sony20164022
dvd61385Sony1548none125
sat15560Sony15176none3
tv45257Sony1548none106
md/tape44745Sony1548none105
sacd/cd08137Sony1548none37
tuner07881Sony1548none33
phono08905Sony1548none32
multi in28873Sony1548none114
Post 20 made on Sunday February 14, 2016 at 12:55
solly
Lurking Member
Joined:
Posts:
February 2016
1
do these codes work with the xfinity xr2 version p2 remote? I haven't had any luck... I have old sony STR DA2400ES, missing the remote. I specifically want to assign a button on the xr2 remote to function as the "Gui mode" button.

Having trouble getting the HDMI to handshake with my new TV. so I figured that going into GUI MODE might allow me to configure the HDMI so the TV can display. Right now, I'm having to go direct to the TV from the Xfinity X1 cable box.
Post 21 made on Sunday February 14, 2016 at 21:44
3FG
Select Member
Joined:
Posts:
August 2009
1,861
The XR series of Comcast remotes aren't programmable.
Page 2 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse