|Post 1 made on Wednesday April 25, 2012 at 19:31|
Evening all. I have a silver comcast remote with the red ok/select button. I have programmed the Aux to code 20199. Navigation keys work fine, but naturally when I press the ok/select button, that button seems locked to cable mode. So I can navigate but not select anything.
Can I reprogram the ok/select button with a code to make it work (if so what code) or do I need to reprogram another button on the remote?
Thanks for any advice.
|Post 2 made on Wednesday April 25, 2012 at 23:13|
Use EFC 00211, following these keymove instructions.
1) Tap AUX
2) Press Setup until 2 blinks
3) Enter 994 (2 blinks)
4) Tap Setup
5) Enter 00211
6) Tap OK/Select
The remote should blink twice.More 9XX instructions
|OP | Post 3 made on Thursday April 26, 2012 at 20:53 |
Did as instructed and the ok/select button now works!
Thanks 3FG. Much appreciated.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.