Your Universal Remote Control Center
RemoteCentral.com
The Lost Manual Crew Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
is there an MSC-Editor User Manual?
This thread has 7 replies. Displaying all posts.
Post 1 made on Saturday June 25, 2011 at 12:30
vitamineg
Long Time Member
Joined:
Posts:
October 2008
33
Hello,

i have the msc-400 and the software but need a user manual for the editor!? Its been awhile since i set it up and my brain fails me.

;)
Post 2 made on Saturday June 25, 2011 at 21:40
djy
RC Moderator
Joined:
Posts:
August 2001
31,831
Would you be a little more specific.

The vast majority of searches suggest this...



...whereas your post implies an actual remote
The Met Office: more useless than a dead octopus - as now confirmed by the BBC.
Post 3 made on Monday June 27, 2011 at 07:48
vbova27
Super Member
Joined:
Posts:
July 2006
2,984
The above user was not incorrect in what he was asking for. URC came out with a standalone editor that still exists for the MSC-400. The MSC-400 is a processor, but needs to be programmed in a control system in addion to remote controls. It needs to be uploaded the same way. Since then URC developed CCP (Complete Control Program) which does the work of programming both the remote and processor, but the need for the MSC-400 editor still exists for remotes that never made it to CCP.
Post 4 made on Monday June 27, 2011 at 10:20
djy
RC Moderator
Joined:
Posts:
August 2001
31,831
On June 27, 2011 at 07:48, vbova27 said...
The above user was not incorrect in what he was asking for. URC came out with a standalone editor that still exists for the MSC-400. The MSC-400 is a processor, but needs to be programmed in a control system in addion to remote controls. It needs to be uploaded the same way. Since then URC developed CCP (Complete Control Program) which does the work of programming both the remote and processor, but the need for the MSC-400 editor still exists for remotes that never made it to CCP.

One of those things not generally available to the hoi polloi then?

Last edited by djy on June 27, 2011 13:34.
The Met Office: more useless than a dead octopus - as now confirmed by the BBC.
OP | Post 5 made on Monday June 27, 2011 at 12:20
vitamineg
Long Time Member
Joined:
Posts:
October 2008
33
found, thanks for the reply guys.

cheers
Post 6 made on Sunday November 3, 2013 at 10:48
Pat_Ceresia
Junior Member
Joined:
Posts:
November 2013
1
vitamineg:
May I ask where you found the editor programing manual? I'm looking for it as well.
Pat
Pat Ceresia
Ottawa, ON, Canada
[email protected]
Post 7 made on Sunday November 3, 2013 at 21:04
Duct Tape
Super Member
Joined:
Posts:
November 2008
4,682
All manuals are listed in the help section of the CCP software.
[Link: facebook.com]
Post 8 made on Monday November 4, 2013 at 00:13
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,536
If Pat's also talking about the standalone editor as this old thread was, the CCP manuals probably won't help. However, URC has abandoned MSC-400 Editor (more so than the other standalone editors - live update no longer works at all), so I probably wouldn't recommend using it any longer.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse