Post 1 made on Wednesday July 16, 2003 at 16:48 |
Sat down with my Axim learning codes tonight. Everything going OK but suddenly got a Time Out error after preesing the key that was to be learnt. Not to unusual, it's happened before.
However this time it just continues to happen every time I now try and learn - I get a timeout after pressing the key to be learnt. I've tried a soft reboot, loaded a different CCF - nothing's worked.
Any clues??
Thanks,
Mike
|
|
OP | Post 2 made on Sunday December 28, 2003 at 19:14 |
Having put the Axim down for several months (almost finished that CCF) I have just started playing around with it again.
Hard reboot, re-loaded TVRemote (V5.5) set it all up and....
... same error. I go Learn and then select the key on my loaded CCF that is to be learnt, the key performs its "pressed" action and then after about 10 seconds I get a pop-up message telling me I have a time-out error. I have no way of learning commands from my remote directly onto my loaded CCF.
I have tried it with and without the IR Extender fitted (EDV model) and it also does the same in non-CCF mode.
Pointers in the right direction greatly appreciated.
Mike
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.