Hello,
As I understand star50fiveoh's message ([Link: remotecentral.com] should be looking for help in this forum(?)It's a TV remote control 5.4 question, but requires significant ProntoEdit experience.I hope I'm in the right forum...

Background Info:
I have an RU940(=TSU2000 in the States)with a CCF which works perfectly.(Here I'm pretty experienced)
I also have an IPAQ3800 with TVRemote controller 5.4.
(here I'm newbie)

Goal:
I want to transfer my CCF to my PDA and get the same performance as with RU940.

Questions:
1)Should I save my CCF in PEdit as a TSU6000/RU970 file in order to get the hard button alignment right (the 4 buttons on the PDA = the four lower hard buttons from the TSU6000)?
2) How do I assign the right hard buttons form the RU940 to the cursor buttons (left/right/up/down/center) on the PDA? Is it done within PEdit (in this case how) or directly on the PDA by learning?

3)My CCF has ca 150 devices (300 CD changer etc) but when transferred to TVRemote controller 5.4.I only can see the 49 first ones. The rest is not availiable on the rolldown menu (like in PE up in right corner of the screen)
Is this normal? Anyway around it? Where did the rest go?
4)While transferring all Macro panels have also disappeared (on PE you have them on the left upper corner as a rolldown menu) Do I have to change my CCF so that all Macro panels are moved up in the Device section before transferring to PDA?

5) Why do some IR commands not work on the PDA as they do on the RU940? Exemple: VCR-Play (RC5) just does not work. I checked, the IR command is there.
I also used the PDA from VERY short distance/all angles to make sure it's not a signal problem. Other buttons like Forward, backwards buttons work OK.

6)Most discreet codes don't work on the PDA (but the corresponding toggle commands have survived the transfer just fine) I can’t understand the reason behind this.

Generally: what’s the best way to transform a RU940/TSU2000 CCF into an equally smooth running PDAwin Remote?

thanks for the help!