Your Universal Remote Control Center
iPhone & WM Remote Apps Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


springboard rf module
This thread has 2 replies. Displaying all posts.
Post 1 made on Tuesday May 29, 2001 at 14:23
Historic Forum Post
i did not see any discussion of this topic
sorry if it's already posted here somewhere

does anyone make a RF Springboard module for the Visor? I heard some mention of it before, but i could never run down the manufacturer. Also in the Omniremote SDK, there is a reference to sending the output as RF... i read it quickly, but it sounded like this was possible.

then you could just send your Omniremote codes to a RF receiver and have it convert it to IR

i have seen the conversion for the Pronto. using the Infared remote extender re200 from smarthome

but why not just put the RF Xmitter in a springboard module and bypass the IR coupling.

i have been looking for IC's that will do this and also integrate with the Springboard slot.

anyone been down this path before?
OP | Post 2 made on Tuesday May 29, 2001 at 14:31
Historic Forum Post
maybe i should just wait for the Bluetooth module
OP | Post 3 made on Thursday June 7, 2001 at 08:21
Historic Forum Post
Do a search in the comp.home.automation forum, there is info there about the Omniremote, the required mod and all the X10 commands.

Good Luck

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse