Your Universal Remote Control Center
RemoteCentral.com
iPhone & WM Remote Apps Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
CCF on PDA
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday October 20, 2006 at 17:37
robcornwall2003
Long Time Member
Joined:
Posts:
January 2006
10
Ok im stuck with CCF on my PDA, ive made a CCF, working fine but when i hold down a button, say increase the volume, it only executes the once (so notch the volume up by 1) but the button is still highlighted when pressure is still being applied. What i want is if i hold down the button is it carry on sending the signal. Ive read through some guide about the 3rd and 4th blocks of an IR code makes up the once/repeat code of a signal but i cant seem to get it to work.

Heres one of the codes im using (this is increase the volume) but it only transmits once

0000 0067 0000 0037 0161 00bb 0019 0015 0019 0042 0019 0015 0019 0042 0019 0042 0019 0042 0019 0042 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015 0019 0015 0019 0015 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015 0019 0042 0019 0042 0019 0015 0019 0015 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015 0019 0015 0019 0042 0019 0042 0019 0042 0019 063a 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059

any help would be great! Thanks
Post 2 made on Saturday October 21, 2006 at 08:49
T-K
Long Time Member
Joined:
Posts:
August 2005
28
On October 20, 2006 at 17:37, robcornwall2003 said...
Ok im stuck with CCF on my PDA, ive made a CCF, working
fine but when i hold down a button, say increase the volume,
it only executes the once (so notch the volume up by 1)
but the button is still highlighted when pressure is still
being applied. What i want is if i hold down the button
is it carry on sending the signal. Ive read through some
guide about the 3rd and 4th blocks of an IR code makes
up the once/repeat code of a signal but i cant seem to
get it to work.

Heres one of the codes im using (this is increase the
volume) but it only transmits once

0000 0067 0000 0037 0161 00bb 0019 0015 0019 0042 0019
0015 0019 0042 0019 0042 0019 0042 0019 0042 0019 0015
0019 0042 0019 0015 0019 0042 0019 0015 0019 0015 0019
0015 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015
0019 0042 0019 0042 0019 0015 0019 0015 0019 0015 0019
0042 0019 0015 0019 0042 0019 0015 0019 0015 0019 0042
0019 0042 0019 0042 0019 063a 0161 0059 0019 0f0c 0161
0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c
0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059 0019
0f0c 0161 0059 0019 0f0c 0161 0059 0019 0f0c 0161 0059
0019 0f0c 0161 0059

any help would be great! Thanks

Edited and tested with RemoteControl II:

0000 0067 0022 0002 0161 00BB 0019 0015 0019 0042 0019 0015 0019 0042 0019 0042 0019 0042 0019 0042 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015 0019 0015 0019 0015 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015 0019 0042 0019 0042 0019 0015 0019 0015 0019 0015 0019 0042 0019 0015 0019 0042 0019 0015 0019 0015 0019 0042 0019 0042 0019 0042 0019 063A 0161 0059 0019 0F0C

Have changed the single shot- sequence lenght with the included IR- editor.

Thomas
OP | Post 3 made on Sunday October 22, 2006 at 11:26
robcornwall2003
Long Time Member
Joined:
Posts:
January 2006
10
Hi, sorry can you explain how you did this in further depth? I need to apply it to more IR codes! thanks
Post 4 made on Monday October 23, 2006 at 07:17
T-K
Long Time Member
Joined:
Posts:
August 2005
28
On October 22, 2006 at 11:26, robcornwall2003 said...
Hi, sorry can you explain how you did this in further
depth? I need to apply it to more IR codes! thanks

1. Start RemoteControl II
2. Open the IR- Database Editor
3. Select any IR code in the tree
4. Paste the CCF- hex code into the edit window
5. Change the single shot lenght with the "Once Sequence" spinning wheel- button from 0 to 22
6. Remove the superfluous bursts by changing the lenght of the entire code with the "Lenght" spinning wheel button

IR Database Editor

Thomas


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse