Your Universal Remote Control Center
RemoteCentral.com
Graphics & User Interfaces Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
virgin media V + box discrete codes?
This thread has 3 replies. Displaying all posts.
Post 1 made on Saturday August 7, 2010 at 18:31
optical10
Lurking Member
Joined:
Posts:
August 2010
4
any chance someone could PM me with the discrete codes for the virgin media V + box?
I'm new to this pronto-edit software but I believe that I need to enter the discrete code in the "View IR" and manually highlight the hex code to replace.", according to the guide here?
I used the "2 Discrete Codes for Arcam Receivers", as was suggested in a forum post here, but they don't seem to have worked so I don't know where I gone wrong?
can anybody help me as am out of my depth?

Any help appreciated
Post 2 made on Sunday August 8, 2010 at 05:34
makitamark
Advanced Member
Joined:
Posts:
April 2004
984
Really you ought to have posted this in the 'discrete codes' forum.
As far as I know the V+ box does not have discrete codes, have you been told different?
Also your Arcam stuff should respond to discrete codes, what model do you have and what are the codes you have tried?
OP | Post 3 made on Sunday August 8, 2010 at 16:14
optical10
Lurking Member
Joined:
Posts:
August 2010
4
On August 8, 2010 at 05:34, makitamark said...
Really you ought to have posted this in the 'discrete codes' forum.
As far as I know the V+ box does not have discrete codes, have you been told different?
Also your Arcam stuff should respond to discrete codes, what model do you have and what are the codes you have tried?

oops, your right sorry,

The only indication that the v+ box uses discrete codes can be found here in this thread, "V+ (Scientific Atlanta) Discrete on/off codes for Pronto??"

However they neglected to provide said codes so I used these found on this forum which mysteriously disappeared from my Pronto edit CCF file and I can't for the life of me locate them again since I restored my PC this morning! as a beginner using the Pronto I find this searching for discrete codes and implementing them overwhelming.

is it in fact impossible to turn the virgin media V+ box on and off with or without discrete codes?

Any help appreciated

PS. It turns out that my virgin media V+ is in fact a "Samsung SMT-H3110" which when I googled doesn't bring up any Pronto codes discreet non-discreet. Does this mean I am out of options?

Last edited by optical10 on August 8, 2010 18:58.
Post 4 made on Sunday August 8, 2010 at 18:58
makitamark
Advanced Member
Joined:
Posts:
April 2004
984
Interesting link..... I seem to get about a bit..
I think I made it reasonably clear in that post that discretes don't exist for the SA V+ box, whether the Samsung shares the codeset or even has discretes I do not know for certain.
Can you post any of your learnt codes?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse