Your Universal Remote Control Center
RemoteCentral.com
Everything Else Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Recording bed control remote signals
This thread has 6 replies. Displaying all posts.
Post 1 made on Saturday February 16, 2013 at 20:57
Photon713
Long Time Member
Joined:
Posts:
April 2008
11
Good Evening, all...I know this is an unusual request, but, I can't seem to find a replacement for a S-cape Wallhugger remote. I am wondering if there is a universal remote that could record the codes and use the universal to control my bed? The bed uses two remotes, one for each side. I can reprogram the second remote to capture my beds remote codes and hopefully have the universal remote capture the codes. I just need to capture the up and down codes. Anyone heard of such a thing. I have an old MX500 that I've never used or programmed. I'm hoping I can use something like that as a useable remote. The information on the remote indicates the following ... FCC ID: KDMBR20543T IC: 2004 102 224 RAVEN
Any suggestions appreciated.
lvMMMCCIX
Post 2 made on Sunday February 17, 2013 at 00:18
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
I imagine that's an RF remote, especially with an FCC ID, which means... it won't work.
OP | Post 3 made on Sunday February 17, 2013 at 08:34
Photon713
Long Time Member
Joined:
Posts:
April 2008
11
Thank You, Daniel...appreciate the feedback. I guess buyers of beds need to ask the seller..."what do I do if the remote stops working?"
lvMMMCCIX
Post 4 made on Tuesday February 19, 2013 at 02:11
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
For clarity, I believe the correct FCC ID is KSMBR20543T. That shows this to be a 310MHz RF remote, which means there are no possible workarounds.
Post 5 made on Wednesday February 27, 2013 at 01:03
gopronto
Senior Member
Joined:
Posts:
April 2008
1,453
well there is a work arond , if you take your RF remotes and put relays (N/O connections) across the button contacts then use your remote to control the relays.
Pronto still one of the best Wi-Fi Remotes,
www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control
Post 6 made on Wednesday February 27, 2013 at 01:05
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,779
Well, that's more of a kludge than a workaround. :-)
Post 7 made on Thursday February 28, 2013 at 03:06
gopronto
Senior Member
Joined:
Posts:
April 2008
1,453
On February 27, 2013 at 01:05, Daniel Tonks said...
Well, that's more of a kludge than a workaround. :-)

Thanks Daniel, but somtimes the only way :)
Pronto still one of the best Wi-Fi Remotes,
www.ikonavs.co.nz and [Link: axiumcontrol.com] Axium Control


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse