Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Programming in System Builder, without letting SB do panel pages.....questions
This thread has 5 replies. Displaying all posts.
Post 1 made on Thursday February 3, 2011 at 22:41
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
I know Motech is programming in this fasion. Anyone else?

I'm monstly concerned about feedback things. For example if I lit SB do everything, i have a ptx3 for the family room and a ipHone app. If on the iPhone I select the family room and change sources, the ptx3 will see that feedback and change panel pages to the appropriate source....are/can you do this manually?

Same type of question with lighting. If I select a scene from the px3, xpanel or iphone, the feedback shows on all the panels (if on the lighting page) the new/current scene selected.

I'm just starting to try building my own template but want to know what the limitations may be before i get there.
do wino hue?
OP | Post 2 made on Thursday February 3, 2011 at 22:50
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
I've also noticed that you can't add a Receiver without adding in the 2-zone volume extender.
do wino hue?
Post 3 made on Friday February 4, 2011 at 07:45
lites4u
Active Member
Joined:
Posts:
August 2006
745
So long as you have the same feed back across all interfaces it works fine. You can program in your own page flips as well so that if you select a source from the iphone the page also flips on the PTX-3.
Post 4 made on Friday February 4, 2011 at 08:00
lites4u
Active Member
Joined:
Posts:
August 2006
745
In a Prodigy System it adds the two zone volume extender by default. You can go into the properties of the device and disable the check box under devices if you don't want to use the extender. The two zone volume extender is pretty cool when you figure it out. kind of like an Interlock source select if you know what I mean. You can base your Presets from the extender feedback. ex On the extender: On source Cable Box selected Fb, you could then add you preset for cable select.
Post 5 made on Friday February 4, 2011 at 19:20
motech
Super Member
Joined:
Posts:
August 2008
3,374
Sent you an email.
Post 6 made on Tuesday February 15, 2011 at 08:57
cjoneill
Select Member
Joined:
Posts:
December 2002
2,174
On February 3, 2011 at 22:41, sofa_king_CI said...
I know Motech is programming in this fasion. Anyone else?

That's how I did mine. I ended up setting up variables for each zone and source to tell what was on and what wasn't and based the feedback on that.

CJ
I'm not a pro


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse