Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MLX-3
This thread has 4 replies. Displaying all posts.
Post 1 made on Thursday February 21, 2019 at 11:06
Gman
Select Member
Joined:
Posts:
February 2009
2,066
Does anyone have one for sale? They are now disco'd. The customer system is older and was programmed in Systembuilder. Newer remotes are not in the database

Last edited by Gman on February 21, 2019 12:10.
Post 2 made on Monday February 25, 2019 at 16:28
SWOInstaller
Senior Member
Joined:
Posts:
October 2010
1,392
On February 21, 2019 at 11:06, Gman said...
Does anyone have one for sale? They are now disco'd. The customer system is older and was programmed in Systembuilder. Newer remotes are not in the database

HR-150's are. Depending on what the MLX-3 is doing for control, I would rather sell the customer an HR150 than a POS MLX-3. You can also install an HR-310 and use the HR-150 programming, you just need to omit hard button 9 on the 310.

Alternatively you could put in an RMC3 with the TSR-310 and EISC from SB project to RMC3. Since the 310 doesn't need a gateway and connects to the WIFI this may be the start of a systems upgrade.
You can't fix stupid
OP | Post 3 made on Tuesday February 26, 2019 at 07:33
Gman
Select Member
Joined:
Posts:
February 2009
2,066
On February 25, 2019 at 16:28, SWOInstaller said...
HR-150's are. Depending on what the MLX-3 is doing for control, I would rather sell the customer an HR150 than a POS MLX-3. You can also install an HR-310 and use the HR-150 programming, you just need to omit hard button 9 on the 310.

Alternatively you could put in an RMC3 with the TSR-310 and EISC from SB project to RMC3. Since the 310 doesn't need a gateway and connects to the WIFI this may be the start of a systems upgrade.

I just looked again in SB and don't see the HR150 in the interface section. All my firmware is up to date as well. Hmmmmmm
OP | Post 4 made on Tuesday February 26, 2019 at 08:15
Gman
Select Member
Joined:
Posts:
February 2009
2,066
Crap....Just found it the HR 150 in a separate folder. Thanks for all the help
Post 5 made on Tuesday February 26, 2019 at 08:15
SWOInstaller
Senior Member
Joined:
Posts:
October 2010
1,392
On February 26, 2019 at 07:33, Gman said...
I just looked again in SB and don't see the HR150 in the interface section. All my firmware is up to date as well. Hmmmmmm

When you right click on the room to add a new interface there is a sub category called "handheld Interfaces" HR100 and 150 are third and forth devices listed.
You can't fix stupid


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse