Post 1 made on Tuesday October 5, 2010 at 15:24 |
sofa_king_CI Super Member |
Joined: Posts: | June 2009 4,230 |
|
|
I am working on a system that has a Bose Lifestyles system. I added an Atlona 4x2 component switch to the system. Pedro built a 232 module for me, which I will finally be trying tomorrow. My question is about how to implement the extra level of Input selection. What I did is went to the AVR-ZONE EXTENDER and found the output signals for source select. So for example I found SOURCE_'DVD-CD:Line-Level Audio'_Selected and put in a step for the Atlona Switch to also switch to the input/output needed for that room and source. I did it on the FALLING EDGE. Is there a reason to do it on the falling edge vs, rising edge? Have I done this the right way? The other idea I had was go to the Programming view PTX3->FAMILY->BOSE_AVR_Zone_Extender->ZONE_1 Subpage which is where I see the buttons with the sources on them that have the Macros for that source and put the extra step there. Also, side question, can i set my IP address to static? i know there was an issue with my first prodigy system and DHCP not be "on". so i've been reluctant to set statics. I want to at least set the PMC2 to static.
|
do wino hue? |
|
Post 2 made on Tuesday October 5, 2010 at 15:46 |
longshot16 Super Member |
Joined: Posts: | November 2009 3,442 |
|
|
Sofa I just set mine up in the macros like you mentioned in step two.
|
The Unicorn Whisperer |
|
Post 3 made on Tuesday October 5, 2010 at 16:16 |
cjoneill Select Member |
Joined: Posts: | December 2002 2,174 |
|
|
The difference between rising edge and falling edge is the rising edge is when someone presses the button and falling edge is when they release it. It won't really matter (except being a slight bit slower) unless you think that someone will hold down the button, waiting for it to change.
CJ
|
I'm not a pro |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.