Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MC3 micro SD cards
This thread has 5 replies. Displaying all posts.
Post 1 made on Sunday March 26, 2017 at 08:43
SWFLMike
Long Time Member
Joined:
Posts:
January 2007
124
I have an MC3 that has been acting up and I've been told by someone that the micro SD card inside may be corrupt, but he didn't know anything beyond that. I did some other searches along those lines and apparently this can be true in early units, which is one is.

Is there anything I can do about it? Does it need to go back? Seem silly, since I can get replacement cards, and data is data (for the most part).
Post 2 made on Sunday March 26, 2017 at 17:45
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
Not as easy as it should be. The card is buried inside under a circuit board. It is not formatted in any Windows format. The only way to copy the card is to have another GOOD MC3 as Crestron will not send you the file or tell you how it can be copied.

I've had a couple do this and was able to recover the card going through the recovery process. The ones I've had to send back was costly for just replacing a $10 SD card.
"Quality isn't expensive, it's Priceless!"
OP | Post 3 made on Sunday March 26, 2017 at 20:21
SWFLMike
Long Time Member
Joined:
Posts:
January 2007
124
Is it just a matter of copying from the good MC3 and putting it on a new card? I did tinker with it a bit, but basically discovered exactly what you described, so I stopped. And posted up here. lol


Thanks for the reply! I was expecting that this one might not get a response.
Post 4 made on Monday March 27, 2017 at 08:28
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
I've found a program that might work for doing this. Going to try this coming week.

When you insert the card from the MC3 into you're computer, it will tell you it needs to be formatted to work which will kill the card.
"Quality isn't expensive, it's Priceless!"
OP | Post 5 made on Saturday April 1, 2017 at 09:46
SWFLMike
Long Time Member
Joined:
Posts:
January 2007
124
Did you happen to try out that program?

I tried to clone my good card and scared myself a bit, since I thought I'd bricked my good MC3. Once it came back up I decided to chill out a bit on 'trying' stuff.

I used a program called HDD Raw Copy Tool. It pretty much just allows you to select a source and a destination and then you click transfer.

The micro SD card I got as a replacement is 16GB, whereas the one that came in the MC3 is a 2GB. Does that matter? Also, I did NOT format anything at any point, even the new micro SD card. Should I have formatted that before transferring to it?
Post 6 made on Saturday April 1, 2017 at 16:31
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
Don't know if the MC3 will work with a 16GB Sd card, it won't recognize all of it for sure. The card should NOT be formatted as the one inside the MC3 is not.
"Quality isn't expensive, it's Priceless!"


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse