| Post 1 made on Thursday January 1, 2015 at 00:11 |
jmccutcheon Lurking Member |
Joined:
Posts: | August 2014
2 |
|
|
I recently purchased this thermostat for my system and thought it would be simple to add to my current program. I am using the 5.2 w/schedule module and following the help file but I am not moving forward with this thing at all. So I thought I would ask you guys if any of you have programmed this thermostat before and what did you use to do so? I can see the thermostat on my network tree and I can see it talking to the controller in debugger but for the life of me I cannot seem to control it. I have tried several mods but none seem to do the trick. I have the demo simpl windows program and the vtpro layout but they are not helping.
Any help is greatly appreciated!
Jay
|
Save and save often!
jmack |
|
| Post 2 made on Thursday January 1, 2015 at 14:03 |
kgossen Super Member |
Joined:
Posts: | March 2008
3,026 |
|
|
Put Tstat's in on every Crestron job we do. I'm assuming you're a diy? Look at the Crestron demo program and follow the help file. There a really simple thing to add.
The F2 key in SIMPL is your friend.
|
"Quality isn't expensive, it's Priceless!" |
|
| Post 3 made on Tuesday January 6, 2015 at 20:21 |
mtaylor Lurking Member |
Joined:
Posts: | December 2014
9 |
|
|
What firmware are you running on the processor?
I'm curious.....I recently updated firmware on a functioning system and after the upload, the 5.2 schedule module stopped working and I had to re-code the module.
I wonder if something got changed with a firmware update.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
