|
|
|
Crestron Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Crestron Mobile on Android
| |
|
Topic: | Crestron Mobile on Android This thread has 12 replies. Displaying all posts. |
|
Post 1 made on Wednesday May 14, 2014 at 00:21 |
mullsey Long Time Member |
Joined: Posts: | January 2009 111 |
|
|
I hope someone can help on the forum.
I am a Crestron end user and manage my own system, I am trying to connect my Samsung mobile to my control system. This is what I have done thus far.
Ethernet card is configured in my pro 2. I have not used a hostname just an ip address 10.1.1.140.
The settings on my handset are
Host IP adress 10.1.1.140 HTTP port 80 CIP Port 41790 Passcode 1234
When I try to connect I get an error stating host and port values appear to be invalid.
Am I missing something.
Thanks
|
|
Post 2 made on Wednesday May 14, 2014 at 00:48 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
Have you configured your router to open port 41790 and point it to your processor? Did you assign the Crestron Mobile to port 41790 and passcode 1234 in SIMPL? Did you use Crestron Mobile and NOT the newer Crestron APP? I'm assuming by you using the IP address, you're attempting this from inside the house? It won't work if you're not on your local network this way.
Last edited by kgossen on May 14, 2014 00:58.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 3 made on Wednesday May 14, 2014 at 04:18 |
mullsey Long Time Member |
Joined: Posts: | January 2009 111 |
|
|
Hi,
Many thanks for taking the time to answer.
I have configured the router. However I haven't assigned anything in simple windows.
This is what I have done in simpl.
In the configuration window I have added iphone touch interface to control interface (there are two options here Connection 1 of 2 and connection 2 of 2) I have added both, one is IP ID07 and the other IP ID08.
In the program window I have added 41790 port1 to connection 1 and 41791 to port2 on connection 2
I could not find where to add the passcode in simpl.
Any further help would be greatly appreciated.
Thanks
|
|
Post 4 made on Wednesday May 14, 2014 at 10:07 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
What version of SIMPL are you using? Sounds to me like a much older version.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 5 made on Wednesday May 14, 2014 at 15:59 |
Scherwi Long Time Member |
Joined: Posts: | January 2013 22 |
|
|
You did not choose the correct device in simpl. When you use the correct device you should get an symbol where you can enter the passcode. Try something like "mobile device"
|
|
OP | Post 6 made on Wednesday May 14, 2014 at 17:44 |
mullsey Long Time Member |
Joined: Posts: | January 2009 111 |
|
|
Hi,
Thanks for the last 2 posts. Simpl is version 4.01.09
There is no option for mobile device, just Crestron mobile.
Thanks again for your help
|
|
Post 7 made on Wednesday May 14, 2014 at 19:11 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On May 14, 2014 at 17:44, mullsey said...
Hi,
Thanks for the last 2 posts. Simpl is version 4.01.09
There is no option for mobile device, just Crestron mobile.
Thanks again for your help So you should only have 1 device with 1 IP ID. If you scroll to the bottom of the module there will be a place for port, project name and passcode. Project name must be exact WITHOUT the extension.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 8 made on Wednesday May 14, 2014 at 19:37 |
johnmax Long Time Member |
Joined: Posts: | June 2004 187 |
|
|
There is no option for mobile device, just Crestron mobile.
That is what you need to use.
|
|
OP | Post 9 made on Wednesday May 14, 2014 at 19:39 |
mullsey Long Time Member |
Joined: Posts: | January 2009 111 |
|
|
OK I have added the port number and passcode and the project name without extension. I think this maybe a firmware issue now as when I upload the project I get the following message
The device firmware does not meet the minimum requirements of the file
Device 4.001.1012 File 4.003
I am assuming that I need to upgrade the firmware to 4.003
As I am end user I do not have access to get the firmware file. Can anyone help?
|
|
Post 10 made on Thursday May 15, 2014 at 09:25 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
Thinking it's the firmware on your Samsung.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 11 made on Thursday May 15, 2014 at 14:37 |
lites4u Active Member |
Joined: Posts: | August 2006 745 |
|
|
Did you add the programming for the phone interface? You did say you were an end user not a Crestron programmer. If you already have a mobile pro project in your system (Taking a wild guess here) just download the crestron app on your Samsung phone and enter the same exact settings into that phone.
|
|
Post 12 made on Thursday May 15, 2014 at 15:43 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
On May 14, 2014 at 19:39, mullsey said...
OK I have added the port number and passcode and the project name without extension. I think this maybe a firmware issue now as when I upload the project I get the following message
The device firmware does not meet the minimum requirements of the file
Device 4.001.1012 File 4.003
I am assuming that I need to upgrade the firmware to 4.003
As I am end user I do not have access to get the firmware file. Can anyone help? Yep you need to update your processor. No, I will not help
|
|
Post 13 made on Thursday May 15, 2014 at 20:08 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
thecynic315 is correct, it's the firmware on the PRO2.
Sorry, can't help with that.
|
"Quality isn't expensive, it's Priceless!" |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|