Post 1 made on Saturday August 31, 2013 at 14:06 |
jonny Long Time Member |
Joined: Posts: | November 2004 49 |
|
|
Hi
Is anyone out there having a problem with the MUTE button on the newer Denon receivers?
ALL of the buttons work for me...except the mute. The mute button will "hang" after awhile. It will become unresponsive. The only fix is to reboot the AV2?
Thoughts?
Jonny
|
|
Post 2 made on Saturday August 31, 2013 at 18:38 |
Fritz Thomas Founding Member |
Joined: Posts: | December 2001 123 |
|
|
Are you using the RS-232 module or IP control? If so I had a similar situation with Marantz receivers using the Crestron module mute toggle command. I ended up using the discrete mute on and off commands from a toggle symbol and that solved my problem. If you are using a standard IR toggle mute command then I can't be sure what's going on there.
|
|
Post 3 made on Wednesday September 4, 2013 at 05:16 |
sofa_king_CI Super Member |
Joined: Posts: | June 2009 4,230 |
|
|
I have one project that the client has complained that it would stop working, but randomly start working again. The one time I went to check, it was working, but since has quit again.
I will look to see what mute command i'm using.
|
do wino hue? |
|
Post 4 made on Friday August 15, 2014 at 15:17 |
msmoran Long Time Member |
Joined: Posts: | April 2004 19 |
|
|
I second the Mute command issue...use the discrete Mute command only and attach the feedback to reflect that condition, i.e., that the Mute is high. The receiver will unmute whenever the VOL +/- is pressed auto-magically!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.