Post 1 made on Wednesday August 1, 2012 at 03:15 |
MacrossZero Active Member |
Joined: Posts: | March 2009 594 |
|
|
Working with simpl and could not figure out for the life of me how to add these modules to my project. Any hints?? TIA
|
Do or Do not, There is no Try. |
|
Post 2 made on Wednesday August 1, 2012 at 09:11 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
Download the demo programs from the Crestron website.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 3 made on Wednesday August 1, 2012 at 12:15 |
Tom Luczywo Founding Member |
Joined: Posts: | November 2001 115 |
|
|
Additionally, if you are working with a 3 series processor, the DNS functionality is built right into the processor and configured in the web browser setup.
|
|
Post 4 made on Thursday August 2, 2012 at 14:41 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
For the DNS:
Step 1 go to mycrestron.com and register the site
Step 2 fill in the URL and password, either in a 3 series processors web utility or in the parameters of the symbol.
Step 2A if using the symbol, press Ctrl+I
Step 3 Profit!
For the Weather
there are 2 modules, the main processor where you just fill in the location then and the module for each touch screen which will drive the logic.
|
|
OP | Post 5 made on Friday August 3, 2012 at 14:34 |
MacrossZero Active Member |
Joined: Posts: | March 2009 594 |
|
|
Thanks I really appreciate it....
|
Do or Do not, There is no Try. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.